Rust Data LabData lab · live
Live readings Servers11,709 Players54,841 Populated3,244 Fresh wipes · 3h155 Sampled every 5 min

Element card · group Community · atomic number 15,338, its rank

My Rust Server | ScalaCube

Offline 15.235.12.178:3338 checked 6d ago

Join the experiment
Atomic mass · players now 0/ 20 0% full Room to join
7-day average0peak –
Rank · atomic number#15,338top 69%
Last wipe6d agono schedule published
Next wipe–too few wipes seen yet
Result 01

Players

Method
Every five minutes for the last two hours, from the Steam server list; hourly average and peak over 48 hours; daily average and peak over 90 days. UTC. Dashed lines are its wipes and the force wipes.
Result
No hourly history yet.

Hourly average and peak, UTC.

Result 02

Server performance

Method
Asked of the server itself, hour by hour and day by day: its frame rate, the entities in its world and the memory it holds.
Result
This server has not answered a direct query in the last 48 hours.

48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 22 Oct. From asking the server directly; low fps and a climbing entity count mean lag.

Result 03

Rank

Result

daily · 1 is best

RankRank in region
15k10k15k20k22 Oct23 Oct25 Oct26 Oct28 Oct29 Oct

Top 69% of all ranked servers. Ranked on player hours over the last seven days.

Reaction kinetics

Wipe schedule

too few wipes seen yet

Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.

wipe-day peak0players, last three wipes

The first 48 hours of its last wipes

01234+0h+9h+19h+28h+38h+47h

Players each hour, from the hour of the wipe. The latest peaked at 0, 0 hours in.

Reaction log

Wipes

newest first
WipedPeakCrowdLastedPlayers before
Fri 23 Oct, 02:09 UTC6d ago 0 – running 0

Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.

Similar servers

the same kind of game, then region, group limit, rate and wipes
  1. 1 Ru Rusty Moose |E… 393
    Rusty Moose |EU Mondays| EU · groups of 12+ · weekly · 519 on average 393/ 400
  2. 2 Ru Rustoria.co - … 339
    Rustoria.co - EU East Long EU · groups of 12+ · monthly · 319 on average 339/ 350
  3. 3 Ru Rusty Moose |E… 38
    Rusty Moose |EU Main| EU · groups of 12+ · weekly · 291 on average 38/ 250
  4. 4 Ru Rustoria.co - … 34
    Rustoria.co - EU Main EU · groups of 16+ · weekly · 276 on average 34/ 250
  5. 5 Ru Rustafied.com … 47
    Rustafied.com - EU Friday EU · groups of 16+ · weekly · 275 on average 47/ 100
  6. 6 Ru Rustoria.co - … 157
    Rustoria.co - EU East Medium EU · groups of 12+ · biweekly · 244 on average 157/ 200

Quick answers

from the figures on this page

Server setup

What map is in play on My Rust Server | ScalaCube?

A procedural map of size 4,000 with seed 12345 runs on My Rust Server | ScalaCube, generated by the game. The map repeats when size and seed match, and you can view it on RustMaps from this page.

What rules has My Rust Server | ScalaCube set, and what settings are in force?

The name of My Rust Server | ScalaCube carries no gather rate. Groups top out at 8 players, the default for the game. survival is the game mode, raiding, building and gathering: the standard game. You can fight other players and raid them. You will find it under Community in the server browser. The VAC anti-cheat from Valve is enabled.

About the server

In what location does My Rust Server | ScalaCube sit?

There is no region on record for My Rust Server | ScalaCube. The location shown is the one a server states; Rust Data Lab does not check where the machine actually stands. 15.235.12.178:3338 is the address it uses.

On what Rust version does My Rust Server | ScalaCube operate?

On Linux, My Rust Server | ScalaCube is running Rust network protocol 2634 and build 167781. The protocol must match for you to join; Steam will update your game.

How reliably does My Rust Server | ScalaCube stay online?

My Rust Server | ScalaCube is not online at the moment; the last sighting was 6 days 6 hours ago. It was online for 5 of 144 hours in the last 6 full days, which is 3% uptime. It first appeared to Rust Data Lab on 22 October 2026.

Wipe days

What is the wiping pattern on My Rust Server | ScalaCube?

My Rust Server | ScalaCube's wipe history on record is too thin yet to tell its rhythm. The next monthly force wipe, which wipes all Rust servers, is scheduled for Thursday 5 November at 19:00 UTC. The world it is running now dates from 6 days 8 hours ago.

How does My Rust Server | ScalaCube look on the day of a wipe?

At their busiest, recent wipes averaged 0 players. 0 hours after the latest wipe, the crowd peaked.

Lists and tags

How should you read the tags on My Rust Server | ScalaCube?

gmrust (Game mode): Survival in the standard Rust style; mp20 (Max players): Player slots: 20; ts8 (Group limit): 8 per team, the default the game ships with; v2634 (Protocol): To join, your game must match protocol 2634; cs167781 (Build): Build number: 167781; ptrak (Networking): RakNet is the network layer here, as standard in Rust; $r? (Region code): No region code is set: that is the tag list My Rust Server | ScalaCube publishes, and the game's server browser reads it. Current players, the queue and the world's creation time sit in the tags too, shown at the top of this page.

Where among the Rust Data Lab lists and filters does My Rust Server | ScalaCube come up?

These themed Rust Data Lab lists carry My Rust Server | ScalaCube: Rust community servers, measured. These filters bring it up on the server list: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last week.

Player numbers

Against other Rust servers, where does My Rust Server | ScalaCube place?

Player hours over the last week put My Rust Server | ScalaCube at #15,338, inside the top 69% of ranked servers.

How many players does My Rust Server | ScalaCube have at the moment?

No live signal from My Rust Server | ScalaCube right now, which was last seen 6 days 6 hours ago. The past week gives an average of 0 players.

How to join

What is the way to join My Rust Server | ScalaCube?

In Rust, press F1 and enter client.connect 15.235.12.178:3338. Or click Launch Rust here to open Rust via Steam and connect automatically.

Server tags

what each one means

Published as mp20,ptrak,$r?,v2634,gmrust,cs167781,ts8

Game

gmrust
Game mode Survival in the standard Rust style.
mp20
Max players Player slots: 20.
ts8
Group limit 8 per team, the default the game ships with.
v2634
Protocol To join, your game must match protocol 2634.
cs167781
Build Build number: 167781.
ptrak
Networking RakNet is the network layer here, as standard in Rust.
$r?
Region code No region code is set.

Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.