Rust Data LabData lab · live
Live readings Servers11,893 Players98,350 Populated3,934 Fresh wipes · 3h402 Sampled every 5 min

Element card · group Community · atomic number 15,338, its rank

My Rust Server | ScalaCube

Offline 198.244.179.144:4841 checked 7d ago

Join the experiment
Atomic mass · players now 0/ 20 0% full Room to join
7-day average0peak –
Rank · atomic number#15,338top 69%
Last wipe8d agono schedule published
Next wipe–too few wipes seen yet
Result 01

Players

Method
Every five minutes for the last two hours, from the Steam server list; hourly average and peak over 48 hours; daily average and peak over 90 days. UTC. Dashed lines are its wipes and the force wipes.
Result
No hourly history yet.

Hourly average and peak, UTC.

Result 02

Server performance

Method
Asked of the server itself, hour by hour and day by day: its frame rate, the entities in its world and the memory it holds.
Result
This server has not answered a direct query in the last 48 hours.

48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 20 Oct. From asking the server directly; low fps and a climbing entity count mean lag.

Result 03

Rank

Result

daily · 1 is best

RankRank in region
15k10k15k20k20 Oct22 Oct24 Oct25 Oct27 Oct29 Oct

Top 69% of all ranked servers. Ranked on player hours over the last seven days.

Reaction kinetics

Wipe schedule

too few wipes seen yet

Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.

wipe-day peak1players, last three wipes

The first 48 hours of its last wipes

01234+0h+9h+19h+28h+38h+47h

Players each hour, from the hour of the wipe. The latest peaked at 1, 6 hours in.

Reaction log

Wipes

newest first
WipedPeakCrowdLastedPlayers before
Wed 21 Oct, 08:50 UTC8d ago 1 – running 0

Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.

Similar servers

the same kind of game, then region, group limit, rate and wipes
  1. 1 Ru Rusty Moose |E… 385
    Rusty Moose |EU Mondays| EU · groups of 12+ · weekly · 514 on average 385/ 425
  2. 2 Ru Rustoria.co - … 455
    Rustoria.co - EU East Long EU · groups of 12+ · monthly · 317 on average 455/ 500
  3. 3 Ru Rusty Moose |E… 978
    Rusty Moose |EU Main| EU · groups of 12+ · weekly · 280 on average 978/ 1,000
  4. 4 Ru Rustafied.com … 55
    Rustafied.com - EU Friday EU · groups of 16+ · weekly · 276 on average 55/ 100
  5. 5 Ru Rustoria.co - … 991
    Rustoria.co - EU Main EU · groups of 16+ · weekly · 265 on average 991/ 1,000
  6. 6 Ru Rustoria.co - … 27
    Rustoria.co - US Main NA · groups of 16+ · weekly · 235 on average 27/ 250

Quick answers

from the figures on this page

Settings and map

What map is in play on My Rust Server | ScalaCube?

A procedural map of size 4,000 with seed 12345 runs on My Rust Server | ScalaCube, generated by the game. The map repeats when size and seed match, and you can view it on RustMaps from this page.

How is My Rust Server | ScalaCube configured, and what rules apply?

No gather rate appears in the name of My Rust Server | ScalaCube. Groups top out at 8 players, the default for the game. survival is the game mode, raiding, building and gathering: the standard game. Raids and player fights are part of play here. The server browser lists it under Community. VAC is on, Valve's anti-cheat.

Server facts

Which location is My Rust Server | ScalaCube based in?

There is no region on record for My Rust Server | ScalaCube. The location shown is the one a server states; Rust Data Lab does not check where the machine actually stands. 198.244.179.144:4841 is the address it uses.

What Rust version does My Rust Server | ScalaCube currently run?

Rust network protocol 2634 and build 167781 on Linux is what My Rust Server | ScalaCube uses. Your game needs to match the protocol to join, and Steam updates it automatically.

How reliably does My Rust Server | ScalaCube stay online?

Right now My Rust Server | ScalaCube is offline, with its last appearance 7 days 8 hours ago. It was online for 9 of 168 hours in the last 7 full days, which is 5% uptime. On 20 October 2026, Rust Data Lab saw it for the first time.

Wipe schedule

What is the wiping pattern on My Rust Server | ScalaCube?

Too few wipes are on record for My Rust Server | ScalaCube to reveal a rhythm. A monthly force wipe happens on every Rust server, and the next one falls on Thursday 5 November at 19:00 UTC. 8 days 8 hours ago the current world was made.

What does a typical wipe day on My Rust Server | ScalaCube involve?

Averaged across its recent wipes, the busiest point drew 1 players. Peak numbers on the latest wipe came 6 hours in.

Lists and tags

Which meanings sit behind the tags on My Rust Server | ScalaCube?

The game's server browser reads the tags My Rust Server | ScalaCube publishes, which are gmrust (Game mode): Survival in the standard Rust style; mp20 (Max players): Player slots: 20; ts8 (Group limit): Teams cap at 8, which is the game default; v2634 (Protocol): The server runs protocol 2634, so your game needs the same version; cs167781 (Build): It runs build 167781; ptrak (Networking): The network layer is RakNet, standard in the game; $r? (Region code): No region code is set. Also in the tags are the players on now, the queue length and the world's creation time, and you can see them at the top of this page.

Which Rust Data Lab filters and lists does My Rust Server | ScalaCube appear in?

These themed Rust Data Lab lists carry My Rust Server | ScalaCube: Rust community servers, measured. Applying these filters on the server list returns it: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last 2 weeks.

Player counts

How does My Rust Server | ScalaCube compare with other servers in the rankings?

The seven-day player-hours table has My Rust Server | ScalaCube at #15,338, in the top 69% of ranked servers.

How many players does My Rust Server | ScalaCube have at the moment?

The last recorded sighting of My Rust Server | ScalaCube was 7 days 8 hours ago, and it is offline now. Over seven days the mean player count is 0.

Getting on

How can you connect to My Rust Server | ScalaCube?

Open the console with F1 in Rust and type client.connect 198.244.179.144:4841. The Launch Rust button on this page does the same job through Steam.

Server tags

what each one means

Published as mp20,ptrak,$r?,v2634,gmrust,cs167781,ts8

Game

gmrust
Game mode Survival in the standard Rust style.
mp20
Max players Player slots: 20.
ts8
Group limit Teams cap at 8, which is the game default.
v2634
Protocol The server runs protocol 2634, so your game needs the same version.
cs167781
Build It runs build 167781.
ptrak
Networking The network layer is RakNet, standard in the game.
$r?
Region code No region code is set.

Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.